Remote Controlled Home Automation Using Bluetooth (Price : 12500 Rs) 

code1001

Our project is designed to control home appliances remotely through Bluetooth wireless data transfer. Many home appliances (Fan, A.C, T.v ...........etc.,) work on A.C power supply. Microcontroller cannot directly drive A.C loads, so we are using a relay drive for A.C control.  

Bluetooth Based Industrial Data Acquistion System (Price : 12500 Rs.) code1002

In this project we are connecting different sensors to monitor the industrial parameters like level sensor, temperature sensor, (LM35) MQ200 to read the boiler level, boiler temperature, smoke exhaustion......etc., Microcontroller reads data from sensors and sends to Bluetooth modem. Modem sends data to Dongle, Bluetooth modem is connected to microcontroller serially with 9600 baud rate. .

Industrial Devices Controlling System Using Bluetooth (Price : 12500 Rs) 

code1003

In our project we can simply use it for transmitting wireless serial data to establish connection between MCU or embedded project and PC. Our project is designed to control industrial devices remotely through Bluetooth wireless data transfer. Many industrial devices work on A.C power supply. Microcontroller cannot directly drive A.C loads, so we are using a relay drive for A.C control.

Interactive Voice Response System using DTMF technology 

(Price : 12000 Rs.)

code1004

This project is aimed to implement the (IVRS) Interactive Voice Response System using DTMF technology under the C# platform. In This Project Some Predefined audio chunks are stored in the PC. When we call to the IVRS mobile number and when the call is established, the user can select the appropriate option by pressing the corresponding key. It will generate a complex frequency, which can be heard on the mobile placed. Hence DTMF tones will be transferred to calling mobile to the called mobile and to the PC via serial communication.

DTMF technology based device control ( Price : 12500 Rs.) 

code1005

The project is aimed to design a system using which the devices can be controlled wirelessly in a home or in industry by using DTMF technology. In this project we can control the devices at homes or industries from our mobile without any contact.

DTMF technology Based Industrial Parameter Controlling System (Price : 13500 Rs.) 

code1006

This project is aimed to design a system to monitor and controlling industrial parameters using DTMF (dual tone multi frequency) technology. The main idea is to implement micro controller based application which can monitor and control industrial parameters like temperature and fire in industries from our mobile without any contact. 

DTMF technology Based Security Locking System (Price : 12000 Rs.)

code1007

This project is aimed to design a security locking system by using DTMF technology. Security is prime concern in our day-to-day life. Everyone wants to be as much as secure as to be possible. An access control systems forms a vital link in a security chain. The micro controller based digital lock presented here is an access control system that allows only authorized persons to access a restricted area.

• Agriculture field motor/ pump control system using GSM. 

(Price : 13500 Rs.)

code1008

This project is aimed to design a system to control the agriculture field motor by using a wireless technology called GSM technology.  This project provides an excellent solution to this process. The farmer need not go to the farm to water his field. He can sit at his present place and start the motor on to water his field. No cabling or hardware connections are required to do this. Everything will be carried in a wireless fashion and this system is entirely an automated product. This project is designed in such a way that a GSM modem is interfaced to the controller through serial port along with a motor.

Home security system using GSM

(Price : 13500 Rs.)

code1009

This project is aimed to provide the security for the homes by designing a system using GSM technology. But what if the security is assured irrespective of the person is inside or outside the house. This Project describes a design of effective security alarm system that can monitor the house with different sensors using GSM modem.

GSM based Fire Detection And Automatic Alert System (Price : 13500 Rs.)

code1010

The main aim of this project is to continuously monitor the house or industries and if any fire accidents occur, the system should alert the siren and also inform immediately to the person concerned by using wireless communication system GSM. This system totally eliminates a person who has to monitor the house or industry all the time. A GSM modem provides the communication interface. It transports device protocols transparently over the network through a serial interface.

Gsm Based Dc Motor Speed And Direction Control (Price : 13500 Rs.)

code1011

The main aim of the project is to design a versatile device that can control DC motor by using GSM technology of wireless communication. This device can be used to control the speed and direction of the DC motor. A GSM modem provides the communication interface. It transports device protocols transparently over the network through a serial interface.

Sms Based Electrical Appilance Control For Home Or Office (Price : 15000 Rs.)

code1012

This project is designed in such a way that a GSM modem is interfaced to the controller through serial port interface, along with the AC devices/loads which are to be controlled by using GSM will be interfaced to the controller through the relays. The GSM modem performs the task of receiving the message from the mobile and sending the messages to the mobile from the controlling unit. If the user wishes to control the appliances ON/OFF in home/office, he has to send a predefined message to the modem from his mobile. The GSM modem receives this message and intimates the same to the microcontroller. Now it is the job of the controller to switch ON/OFF the corresponding appliances in accordance with the received message.

Industrial Data Logger Using Gsm Office  (Price : 15200 Rs.)

code1013

This project is designed in such a way that A GSM modem is interfaced to the controller using serial communication along with a temperature, fire, and humidity and light sensors. The temperature sensor will be interfaced to the controller through an ADC to convert the analog value sensed into the digital value .The microcontroller continuously monitors the status of the sensors. Whenever the user wants to read the data from the sensors he has to send a predefined message to the modem. The modem receives the predefined messages and intimates the same to the microcontroller. Now, it is the job of the microcontroller to read the values from the corresponding sensors process it and send the requested values to the user mobile.

Gsm Based Indusrial Parameter Monitoring System Using Serial Communication (Price : 14500 Rs.)

code1014

This project is designed in such a way that we will interface a temperature sensor and three water level sensors to an 8 bit microcontroller. A GSM modem will be interfaced to the controller using serial communication. Three water level sensors will be arranged at 3 different levels of boiler and the temperature sensor will be interfaced to the controller through an ADC to convert the analog value sensed into the digital value. . The microcontroller continuously monitors the output of the temperature and water level sensors. If any of the sensors trigger, the microcontroller can detect this and immediately sends the data or status of the sensors as a message to the user mobile through GSM modem. By this way we can monitor parameters in industries.

Intelligent System For Hazardous Gas in Coal Minesusing Gsm (Price : 14500 Rs.)

code1015

GSM based Railway Accident Identification And Alert System (Price : 13500 Rs.)

code1016

The main aim of this project is to alert people from railway accidents by using vibration sensor. A vibration sensor is interfaced to the controller. This sensor can found railway accidents. Each railway coach contain single vibration sensor. If train move normally no vibrations occurr. If accident occurs any one of the sensor in train must be activated and microcontroller takes signal from the sensor. After detecting pulse from sensor microcontroller sends SMS to particular numbers through GSM modem and for alerting buzzer will be on. Microcontroller sends accident report along with coach number which is affected by accident. This effected coach number find out by sensor physical placing in coaches. A buzzer will be interfaced to the controller for alert.

Temperature Measurement Over Gsm Mobile (Price : 13500 Rs.)

code1017

This project is designed in such a way that A GSM modem is interfaced to the controller using serial communication. The temperature sensor will be interfaced to the controller through an ADC to convert the analog value sensed into the digital value .The microcontroller continuously monitors the status of the sensor. Whenever the user wants to know the temperature value he has to send a predefined message to the modem. The modem receives the predefined message and intimates the same to the microcontroller. Now, it is the job of the microcontroller to read the value from the corresponding sensor process it and send the requested value to the user mobile. The controller will also be programmed in such a way that it alerts the buzzer, if the sensed temperature crosses the pre set value. A buzzer interfaces to the controller gives an audio indication of over temperature.

Password Protected Gsm Based Device Control (Price : 14000 Rs.)

code1018

This project is designed in such a way that a GSM modem is interfaced to the controller through serial port interface. The AC devices/loads which are to be controlled by using GSM will be interfaced to the controller through the relays. The GSM modem performs the task of receiving the message from the mobile and sending the messages to the mobile from the controlling unit. Each electrical device or load will be provided with a unique password. These electrical appliances can be operated only if the correct password is sent to the device through controlling unit using GSM technology. If the user wishes to control the devices ON/OFF in industries or homes, he has to send correct password to the modem from his mobile. The GSM modem receives this message and intimates the same to the microcontroller. Now it is the job of the controller to switch ON/OFF the corresponding devices in accordance with the received password. If the password entered is wrong, the system alerts the buzzer immediately. This method of operating the appliances helps in providing security to the devices and also power is saved up to some extent. A buzzer will be interfaced to the controller for providing warning sounds.

GSM based Easy Sms System (Price : 13500 Rs.)

code1019

This project is built on 8051 micro controller, with a GSM modem interfaced through serial communication, an AT keyboard is also interfaced to the micro controller which takes input from the user, converts it into data and send the SMS to the desired mobile number, through a GSM modem. An LCD is also used to display the text and destination mobile number, where the SMS should be sent.

Sms Based Electrical Apparatus Control In Offices (Price : 15000 Rs.)

code1020

This project is designed in such that a GSM modem is interfaced to the controller through serial port interface. Along with the AC devices/loads which are to be controlled by using GSM will be interfaced to the controller through the relays. The GSM modem performs the task of receiving the message from the mobile and sending the messages to the mobile from the controlling unit. If the user wishes to control the appliances ON/OFF in offices, he has to send a predefined message to the modem from his mobile. The GSM modem receives this message and intimates the same to the microcontroller. Now it is the job of the controller to switch ON/OFF the corresponding appliances in accordance with the received message. 

GSM based Development Of An Embedded System For Unmanned Railway Gate (Price : 13500 Rs.)

code1021

This project is designed in such a way that a GSM modem will be interfaced to the controller through serial port interface along with the DC motor through voltage driver IC L293D. The railway gate is connected to this motor. The microcontroller will be programmed in such a way that some predefined messages will be assigned to the controller for controlling the motor in different directions i.e. opening and closing of the door. When ever the user wants to control the gate, he has to send predefined messages to the modem. When the modem receives data (SMS), it will intimate the same to the microcontroller. Now, it is the job of the controller performs the predefined task of controlling the gate in clockwise or anticlockwise in accordance with the message received from the modem.

GSM based Automatic Mobile Alert System For Lethal Gas Detection 

(Price : 13500 Rs.)

code1022

This project is designed in such a way that a GSM modem will be interfaced to the controller using serial communication along with a gas sensor .This control unit will be fixed in the house or in an industry. A buzzer is also interfaced to the microcontroller for an audio identification. The micro controller continuously monitors the status the sensor. Whenever the status of the sensor changes, microcontroller detects this and sends a predefined message to the modem. The modem sends the same message to the user mobile number and the user can take the necessary action immediately. The siren will be alerted simultaneously.

Engine Monitoring Through Gsm Modem (Price : 15000 Rs.)

code1023

The project is built on 8051 micro controller, with the motto that it senses the engine ON/OFF condition, temperature of the engine and fuel level, all the above sensors are interfaced to the micro controller. At regular intervals of time, the sensors data will be sent to a predefined mobile number, the engine parameters are thus monitored.

Sms Based Banking Security System (Price : 14500 Rs.)

code1024

This project is designed in such a way that a GSM modem is interfaced to the controller through serial port interface. A DC gear motor will be interfaced to the controller through driver IC L293D for opening and closing of the locker door. The GSM modem performs the task of receiving the message from the mobile and sending the messages to the mobile from the controlling unit. This arrangement will be fixed to the locker door. Whenever an authorized person wants to open the locker door he has to send predefined password message to the control system from his mobile. The GSM modem receives this message and intimates the same to the microcontroller. Now it is the job of the controller to check the received message will match with the predefined message or not, if it matches then DC gear motor is operated to unlatch the solenoid-operated lock so the locker door can be open. At the end of preset delay, the DC gear motor is operated in reverse direction and the door gets locked again.

Gsm Based Smart Information System For Lost Atm Cards (Price : 14500 Rs.)

code1025

This project is designed on 8051 micro controller, which is interfaced with a GSM modem to send the message about the lost card details to the user. Here how it works: In this project we interface the ATM machine to GSM modem, Whenever any user loses his ATM card, he puts a complaint in the bank just by sending message, When this lost card if placed in the ATM center the card details will be immediately sent to the user and near by police station, Therefore one gets maximum security to their ATM card by monitoring it continuously. The controller will send the SMS through GSM modem, via serial communication protocol RS 232.  

Power Grid Control Using Gsm (Price : 14000 Rs.)

code1026

This project is designed in such a way that a GSM modem is interfaced to the controller through serial port interface, along with the AC devices/loads which are to be controlled by using GSM will be interfaced to the controller through the relays. The GSM modem performs the task of receiving the message from the mobile and sending the messages to the mobile from the controlling unit. If the user wishes to control the devices ON/OFF in industries, he has to send a predefined message to the modem from his mobile. The GSM modem receives this message and intimates the same to the microcontroller. Now it is the job of the controller to switch ON/OFF the corresponding devices in accordance with the received message.

Vehicle Over Speed Indication To Traffic Control Room Through Gsm  (Price : 14000 Rs.)

code1027

If any vehicle crosses the speed limit means the time between the activation of two IR sensors is less than the time limit, the GSM modem sends corresponding data to the control room as per the code logic. Here a 16X2 LCD will also be interfaced to the controller to display the speed status of the vehicle. Here we use 8051 as a microcontroller with 5v DC Power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer. Serial (UART) protocol is primary concern here. The main heart of this project is GSM/GPRS modem and it work on GPRS AT commands.

Dam Level Warning Using Gsm Sms (Price : 14000 Rs.)

code1028

The project is designed in such a way that the micro controller 8051 is interfaced to three water level sensors which are placed at 3 levels of the dam, along with a dc motor. And the dam gate which has to be controlled based on the water level, is connected to this motor. A GSM modem will be interfaced to the controller using serial communication. The water level in the dam will be continuously monitored by the micro controller using sensors. If any sensor activates the corresponding sensor status will be send as a message to the required mobile from modem. Whenever the controlling person wants to open/close the dam gate, he will send a predefined message from his mobile to the modem. The modem receives the message from the mobile and performs the specified task i.e. opening/closing the gate.

GSM based Control Of Soil Moisture Irrigation System (Price : 14500 Rs.)

code1029

This project is designed in such a way that the GSM modem is interfaced to the controller through a line driver IC MAX232 along with a Humidity sensor and a motor. The microcontroller is programmed in such a way that it continuously monitors the humidity sensor, and based on the status of the sensor, it sends corresponding message to the user mobile indicating the status, with some delay. So based on the the status of the sensor, if the farmer wishes to water the field he sends the pre defined message to the GSM modem. So the GSM modem receives the message and passes it to the controller and the motor will be turned ON , as per the code logic.

Development Of A Gsm Based Vehicle Security System (Price : 15200 Rs.)

code1030

This project consists of microcontroller, GPS modem, GSM and Security switch. Security switch connected to microcontroller with positive logic. This project fixed inside the vehicle. Press security switch after parking the vehicle. Then microcontroller locks the coordinates (latitude, longitude and altitude) of that particular place. If anybody move the vehicle from that place microcontroller can detect and sends SMS to the user or vehicle owner. After moving vehicle from fixed coordinates microcontroller sends coordinates to user continuously. With the help of this project we can easily find out the vehicle position through coordinates.

Gsm Integrated Smart Atm Transaction System (Price : 15000 Rs.)

code1031

This project is designed in such a way that the microcontroller is interfaced to the GSM modem through a serial line driver IC MAX232 along with an LCD. When ever the use does any transaction with his ATM card or account, the concerned description is sent as an SMS to the user mobile, thus the transaction is called as a smart transaction system. The LCD displays the status of the system.

Sms Based Ac Motor Speed Control (Price : 15000 Rs.)

code1032

This project is designed in such a way that a GSM modem is interfaced to the controller through serial port interface. The GSM modem performs the task of receiving the message from the mobile and sending the messages to the mobile from the controlling unit. An AC motor will also be interfaced to the controller through a TRIAC. The main advantage of using a TRIAC is to vary the speed of an AC motor. TRIAC reduces the energy flow to the motor and works very well for alternating currents. If the user wants to control the speed of an AC motor, he has to send a predefined message from his mobile to the modem. The modem receives the message from the mobile. Now, it is the job of the controller to read the data received from the modem and to perform the predefined task of rotating the motor and increasing, decreasing the speed of an AC motor.

Gsm Based Vehicle Fuel Level Monitoring Through Sms (Price : 15000 Rs.)

code1033

This project is built on 8051 micro controller, in this project a micro controller is interfaced with a GSM modem via serial interface, two fuel level sensors placed in the fuel tank are interfaced to the micro controller which are continuously monitored, whenever one of the sensors activates, immediately a the information is sent to the concerned mobile number in the code. Using this project we can continuously track the status of the fuel level in the vehicle. The status of the sensors will be displayed on the lcd.

Acquiring Altitude Longitude And Latitude using GPS (Price : 13500 Rs.)

code1034

This project consists of microcontroller, GPS modem and 16X2 LCD. GPS modem takes latitude, longitude and altitude values from satellite and displayed on 16X2 LCD. According to GPS modem position on earth coordinates (latitude, longitude and altitude) will vary from place to place. These coordinates not directly come from satellite, these are in the form of NMEA form. C program extract coordinates from NMEA format and displayed on 16X2 LCD.

Automobile Theft Identifications Using Gps (Price : 15000 Rs.)

code1035

This project consists of microcontroller, GPS modem, GSM and Security switch. Security switch connected to microcontroller with positive logic. This project fixed inside the vehicle. Press security switch after parking the vehicle. Then microcontroller locks the coordinates (latitude, longitude and altitude) of that particular place. If anybody move the vehicle from that place microcontroller can detect and sends SMS to the user or vehicle owner. After moving vehicle from fixed coordinates microcontroller sends coordinates to user continuously. With the help of this project we can easily find out the vehicle position through coordinates.

Gps Based High Precision Universal Clock for Atomic Laboratories (Price : 12500 Rs.)

code1036

This project consists of microcontroller, GPS modem and 16X2 LCD display. This project gives exact clock which is universal. This is entirely different from normal clock. Normal real time clock may vary from place to place. But this universal clock is unique and exact clock with respective to place.GPS satellites gives this universal clock to GPS modem, these GPS modems are connected to microcontroller through serial interface. But this time or clock not in direct format, it is in NMEA format. C code extracts this format to direct format and displayed on 16X2 LCD.

Automatic Fall Detection And Activity Monitoring For Elderly People MEMS based (Price : 15000 Rs.)

code1037

The main aim of the project is to design a MEMS based system using which fall detection can be done and to protect them by alerting doctor through GSM modem. Micro electromechanical systems (MEMS) (also written as micro-electro-mechanical, Micro Electro Mechanical or microelectronic and micro electromechanical systems) is the technology of very small mechanical devices driven by electricity and it merges at the nano scale into nano electromechanical systems (NEMS) and nanotechnology.The main aim of the project is to design a MEMS based system using which fall detection can be done and to protect them by alerting doctor through GSM modem. Micro electromechanical systems (MEMS) (also written as micro-electro-mechanical, Micro Electro Mechanical or microelectronic and micro electromechanical systems) is the technology of very small mechanical devices driven by electricity and it merges at the nano scale into nano electromechanical systems (NEMS) and nanotechnology.

MEMS based Head Movement Tracking System (Price : 13500 Rs.)

code1038

The main aim of this project is to track the position of head using MEMS. The MEMS will be placed on the head. Whenever the head moves in any direction, the mechanical movement of the head will be recognized by MEMS.MEMS convert this mechanical head movement into equivalent electrical signals and send it to the microcontroller. The microcontroller receives these signals and sends them to the PC.

Mems Based Home Appliance Control (Price : 13500 Rs.)

code1039

The aim of this project is to control the home appliances by using MEMS. The MEMS will be tagged to the hand. Whenever the hand moves in a particular direction, the mechanical movement of the hand will be recognized by MEMS. Here we consider 4 directions i.e. front, back, left, right and stop. MEMS convert this mechanical hand movement into equivalent electrical signals(X, Y, Z coordinates) and send it to the microcontroller.

Accelerometer Based Hand Gesture Recognition System (Price : 13500 Rs.)

code1040

In this project MEMS connected to ADC and it gives ADC values. We use MCP3202 as ADC and gives values to microcontroller. The microcontroller receives these signals and sends them to the PC. And here the front end application will be developed in PC on c# .NET platform which can read the data from the serial interface and as per the gesture, the audio is provided through speakers like LEFT, RIGHT etc.   

Fingerprint Based Physical Access Control Vehicle Immobilizer (Price : 15000 Rs.)

code1041

The project is designed to provide absolute security for vehicles. Normal vehicles (two or four wheelers) start with normal valid key. But there is wide scope to theft vehicle with duplicate keys. This system avoids thefting of vehicles. For this microcontroller have finger print module with serial connectivity. Initially vehicle owner enroll in the Finger Print module (ROM).If he wants to starts the vehicle scan image and microcontroller detects and compare with database of enrollment area. After checking, it gives output pulse through relay for IC engine ignition. If scan image is not valid it gives buzzer sound and display alerting message. (It is better to enroll at the time of program).

Fingerprint Based Electonic Voting System (Price : 15200 Rs.)

code1042

The main aim of this project is to avoid rigging completely. Electronic voting systems have come into picture to prevent rigging up to the maximum extent. But even there may be some malfunctions during elections. Thus, fingerprint based electronic voting system has been designed. When a person wants to register himself in the voter list, he has to provide his complete details along with his fingerprint image. Thus, when the same person comes to poll his vote during the elections, he needs to give his fingerprint image before polling his vote. Thus, the system scans his fingerprint image, compares the image with the already stored image. If both the images are matched, the person can enter into the room to poll his vote by opening the door, and it will be closed after some delay. If not, the system simply alerts the buzzer not allowing the voter to poll his vote.

Fingerprint Based Attendance Record System (Price : 15500 Rs.)

code1043

The fingerprint module scans the student's image and passes the scanned image to the microcontroller. The controller reads the scanned image, compares this image with the already stored image. If both are matched, the student's attendance will be registered for that day. If it is not matched, the student's attendance will be marked as absent and buzzer indication will be given. By simply pressing a switch, we can get the list of absentees for that day. We can see details on 16X2 LCD. (In this project we can connect microcontroller to PC and PC maintain presents and absents list with help of C# application-But it is optional).

Fingerprint Based Bank Locker System (Price : 15700 Rs.)

code1044

The persons who can access bank locker, first need to enroll in the biometric scanner. But everyone can't enroll in the bank locker, because it has unique password for enrolling. Bank employees only know the password. If password is wrong we cannot enroll in the scanner. This system allows persons who are enrolled. If they didn't enroll it alerts through message on 16X2 LCD. If the scanned image matches the stored image, the person is allowed to enter into the locker room. The main door of the locker room will be opened by rotating the motor fixed to it. The door closes automatically after a small delay. If it is not matched, indication is given to alert the buzzer.

Fingerprint Based Security System (Price : 14500 Rs.)

code1045

The project is designed to provide absolute security in industries. The persons who are the employees of the industry have to be registered initially as a sign of authentication. Thus, the fingerprints of the person will be scanned and saved in the database. A password will be given to the user along with the fingerprint. Thus, whenever the employee tries to enter into the organization, he has to scan his image to prove that he is an authorized person to the organization. Thus, the fingerprint module scans the image and sends it to the microcontroller. The microcontroller reads the image, compares the image with the already stored images in the database. If image is equals to database then message will display on 16X2 LCD display. Otherwise unauthorized message will display and buzzer gives beep sound. For authorized entry microcontroller triggers relay.

Fingerprint Based Vehicle Security System (Price : 15000 Rs.)

code1046

The project is designed to provide absolute security for vehicles. Normal vehicles (two or four wheelers) start with normal valid key. But there is wide scope to theft vehicle with duplicate keys. This system avoids thefting of vehicles. For this microcontroller have finger print module with serial connectivity. Initially vehicle owner enroll in the Finger Print module (ROM).If he wants to starts the vehicle scan image and microcontroller detects and compare with database of enrollment area. After checking, it gives output pulse through relay for IC engine ignition. If scan image is not valid it gives buzzer sound and display alerting message. (It is better to enroll at the time of program).

Fingerprint Recognized Atm System 

(Price : 15500 Rs.)

code1047

This project consist microcontroller, finger print scanner and 16X2 LCD display. In general ATMs along with access card it needs password. But there is a chance to manipulate ATM card and Password. But here instead of password we use finger print scanner. After swipe the card system asks image for scanning. If image is valid process go to next step, otherwise it gives alerting message with beep sound. It is very useful for public and no matter of manipulations. We use RFID reader for card swiping (optional).

Vehicle Parking System Using Smart Card (Price : 13500 Rs.)

code1048

This project is built on an 8051 micro controller; in this project each user is assigned a smart card which holds a unique serial number. When a valid user with a card enters into the parking area of an apartment or office or a gated community, his card is authenticated and allows the personnel by opening the gate for car parking slot, if the card is not authorized at that community, then a buzzer is activated to inform the security personnel.

Automatic Door Opening And Closing Using Smart Card (Price : 13500 Rs.)

code1049

In this project, the smart card reader is interfaced with the micro controller and when the card is inserted into the module, it reads the data in the card and displays on the LCD. If the data in the card is matched with the data stored in the program memory, then it compares and displays authorized message. If the data is not matched it displays unauthorized message. For authorized message, the door will be opened and closed automatically after a small delay. If it is an unauthorized person it alerts the persons through a buzzer.

Hospital Management System Using Smart Card (Price : 13500 Rs.)

code1050

we have developed a project called Hospital Management System using Smart card. The patient will be provided with a health card, when he/she sees the doctor for the first time. The health conditions of the patient will be tested and all these details will be saved into his/her health card. When the patient comes to the doctor for his/her review, the patient has to insert the health card into the smart card reader present at the doctor. The parameters pertaining to the patient's health will be displayed on the LCD. Thus, the doctor after having a glance on these details will perform the tests once again if necessary and these values will be updated into the health card for the next review to the doctor.

Rfid Based Attendance System (Price : 13000 Rs.)

code1051

The project is designed in such a way that the controller will be interfaced to the RFID reader through a line driver IC max232 for serial communication. On the other hand, the controller will also be interfaced to the PC serially. Serial communication is often used either to control or to receive data from an embedded microprocessor. Each student will be issued with a unique RFID card. Whenever an RFID card is swiped over the reader, it gets the card information and sends to the microcontroller serially. So the controller receives the data and transmits it to the PC, as per the code logic. C# application in PC always interacts with serial port and it maintains the data base along with corresponding card details. So based on the received data the application can update the employee/student log.

Library Management System Using Rfid (Price : 13500 Rs.)

code1052

These RFID tags will contain the information like name of the student, year of joining, branch of specialization etc. These data stored in application data base. Whenever a student wishes to take a particular book from the library, the librarian places the tag present in the book near the reader so that the reader reads the information of the book and stores in the database. Then librarian has to enter student information in application. After return the book librarian has to press delete button. Then data will be deleted from data base. For small and medium systems notepad or word files are acting as data base. Microcontroller gives Beep sound if unauthorized cards occur.

Rfid Based Ration Card (Price : 12500 Rs.)

code1053

The project is built on 8051 micro controller; the project consists of an RFID reader, RFID cards, an LCD, each user is issued with an RFID card which carries a unique code, when the user needs grocery, he/she needs to show the card to the RFID reader housed at the ration shop, then the name and the allocated grocery information is displayed on the LCD. The stock agent has to render that much of ration to the user, Once the user has used his/her allocated grocery, he /she is not allowed again until the next session of allocation from the governing authority.

Rfid Based Highway Toll Collection 

(Price : 13500 Rs.)

code1054

This project is built on 8051 micro controller; the project consists of RFID reader, LCD, motor and a motor driver. When the vehicle approaches the toll gate, the user has to show the RFID card to the reader. Then the system will automatically deducts the predefined amount from the users account by pressing button and the remaining amount is shown on the LCD, at the same time, a motor will be rotated to open the gate, with some delay the gate will be closed. This process continues until the amount in the users account exudes.

Rfid Based Car Parking System (Price : 12500 Rs.)

code1055

This project is built on an 8051 micro controller; in this project each user is assigned an RFID card which holds a unique serial number. When a valid user with a card enters into the parking area of an apartment or office or a gated community, his card is authenticated and shows the available car parking slot next to the previous car, if the card is not authorized at that community, then a buzzer is activated to inform the security personnel. A motor is also interfaced to the system which opens the gates for authorized entries.

Rfid Based Security System For Mining Industries (Price : 12500 Rs.)

code1056

The main purpose of the project is to provide automation for mining industries. In all mines, coal will transfer through vehicles or Lorries. All vehicles information proceeds by manual. But in this case lot of chance to manipulate. In this project each vehicle established with RFID cards, If RFID tag detected then microcontroller validates tag and gate will open. If microcontroller detects invalid tag then buzzer will come and gate will not open.

Ezee Link Card For Public Transport System (Price : 12500 Rs.)

code1057

The EZEE link card was the very first contactless stored value card introduced for public transit use on the conventional public transport like buses and trains Due to its contactless nature, the card completes all its transactions within 0.2 seconds and in this way, revolutionarily makes travelling on buses and trains that much faster and smoother.

Personal Health Montoring With Wifi Based Mobile Devices (Price : 13000 Rs.)

code1058

The aim of this project is design a system to monitor the vital signs of a patient by using the compact bio-medical wireless sensor notes on android By using project we can continuously monitor a priority based patient health conditions during unfortunate seriousness of the patient and give the service by wireless transmissions between medical devices and continuously monitor the core temperature and carbon dioxide concentration.

Industrial Parameters Monitoring Through Voice (Price : 12500 Rs.)

code1059

The aim of the project "INDUSTRIAL PARAMETERS MONITORING THROUGH VOICE " is to design a system using which various physical parameters such as light, fire, humidity of an industry can be monitored through a PC using the microcontroller 8051 and a font end software C# .NET. In this competitive world and busy schedule human can't spare more time to perform daily activities manually. It is very easy to control devices through PC instead of controlling devices manually. To communicate any device to pc needs HyperTerminal which is understand only by technical people.

Hitech Safety Implementation By Voice Commands (Price : 12500 Rs.)

code1060

The aim of the project HI_TECH SAFETY IMPLEMENTATION BY VOICE COMMANDS is to design a system using which various physical parameters such as light, fire, humidity of an industry can be monitored through a PC using the microcontroller 8051 and a font end software C# .NET. In this competitive world and busy schedule human can't spare more time to perform daily activities manually. It is very easy to control devices through PC instead of controlling devices manually.

Environmental Parameters Monitoring Through Voice (Price : 12000 Rs.)

code1061

This project is very useful in industries and is designed in such a way that the controller is interfaced to PC using serial communication technique. Serial communication is often used either to control or to receive data from an embedded microprocessor. In serial communication the data is sent as one bit at a time. Serial communication is a form of I/O in which the bits of a byte being transferred appear one after the other in a timed sequence on a single wire. Serial communication is commonly used in applications such as industrial automation systems, scientific analysis and certain consumer products.

Pc Based Optimim Power Management System For Hostels (Price : 13500 Rs.)

code1062

The aim of the project "PC BASED OPTIMIM POWER MANAGEMENT SYSTEM FOR HOTELS" is to design a system using which the AC loads in a hotel can be controlled through a PC using the microcontroller 8051 through which the power management can be optimized. The project is designed in such a way that the controller is interfaced to PC using serial communication technique. Serial communication is often used either to control or to receive data from an embedded microprocessor. In serial communication the data is sent as one bit at a time.

Pc Based Stepper Motor Speed And Direction Control (Price : 13500 Rs.)

code1063

The main aim of the project is to design a system using which we can control the speed and direction of the stepper motor by using PC and the microcontroller 8051. The project is designed in such a way that a PC will be interfaced to the controller through serial communication, using which we will input the data to the controller using the hyper terminal of PC to control the motor. Here we will use a serial line driver IC MAX232 to interface the PC with controller.

Gsm Based School Children Security System Based On Rfid (Price : 13000 Rs.)

code1064

This project is built on 8051 micro controller which is interfaced with RFID and GSM module. In this system each student is assigned a unique RFID card, this card contains the students information like his/her name and roll number. When the students arrives the school he/ she needs to show the card at the school entrance, when the card is shown to the RFID reader, the details inside the card is read and sent to the micro controller, which then sends a status message to the parent of the corresponding student.

RF Based Patient Monitoring System (Price : 13500 Rs.)

code1065

This project includes the branch of Biomedical Engineering. This project aims at monitoring the patient's health conditions continuously. The parameters like the pulse rate, pressure, blood sugar, urea content in the blood are to be monitored continuously. In other words, the doctor will be diagnosing the patient continuously. This project uses the wireless concept, RF. The project is designed in such a way that, the analog quantities which are to be recorded continuously are taken and converted into corresponding digital values using an eight channel ADC.

DC Motor Speed And Direction Control Using RF With Pc (Price : 13000 Rs.)

code1066

The main aim of the project is to design a versatile device that can control DC motor by using RF technology of wireless communication. This device can be used to control the speed and direction of the DC motor. The RF modules used here are STT-433 MHz Transmitter along with an RF encoder HT12E, STR-433 MHz Receiver along with an RF decoder HT12D. The project is designed in such a way that a PC will be interfaced to the controller through serial communication.

Multiple Devices Controlling Using ZigBee (Price : 13500 Rs.)

code1067

The project is designed in such a way that an X-BEE transceiver will be interfaced to a PC serially using a driver IC MAX232, to input the predefined data from PC to the X_BEE module, on the transmitter side. And on the receiver side the controller will be interfaced to another X-BEE transceiver which can receive the transmitted data from the remote transceiver, and to the ac loads through relays. Whenever a predefined data is transmitted from the PC to the transceiver on the transmitter side , the same data will be wirelessly transmitted to the remote transceiver and will be fed to the controller. Now it is the task of controller to turn ON/OFF the loads through relays based on the data received.

Zigbee Based Wireless Electronic Notice Board 

(Price : 13500 Rs.)

code1068

The project will be designed in such a way that an XBEE transceiver will be interfaced to the PC through a serial line driver IC MAX232, to transmit the data received by the keyboard. At the receiving end, the controller will be interfaced to the LCD and an other XBEE transceiver. The transceiver receives the data coming from the transmitter and the same data will be fed to the microcontroller . The controller sends this data to the display unit and thus the message given by the user at the transmitter end will be displayed on 16X2 LCD display.

Zigbee Based Real Time Fluid Tank Level Monitor And Control (Price : 13500 Rs.)

code1069

The project is aimed to design an industrial automation system by using wireless communication technology of ZIGBEE using which the fluid level in the tank can be monitored and controlled. ZIGBEE is a specification for a suite of high level communication protocols using small, low-power digital radios based on the IEEE 802.15.4-2003 standard for Low-Rate Wireless Personal Area Networks (LR-WPANs). ZIGBEE is targeted at radio-frequency (RF) applications that require a low data rate, long battery life, and secure networking.

Patient Health Monitoring System Using Zigbee (Price : 13500 Rs.)

code1070

The project is designed in such a way that, the analog quantities which are to be recorded continuously are taken and converted into corresponding digital values using an eight channel ADC. Here we consider temperature and pulse oxymeter sensors to monitor the temperature, blood pressure and heart beat respectively. The processed data from ADC is sent to microcontroller. The microcontroller continuously monitors the status of the sensors and the X-Bee transceiver will be interfaced to the microcontroller through serial communication to pass the corresponding sensors data to the control room PC. The Pc will be also interfaced with another X-Bee transceiver through serial communication. The doctor can continuously check the patient's status by checking the parameters displayed on the PC and will take the immediate action if the parameters exceed the normal values.